- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 海绵泡沫材料检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
粉体综合物性测试仪
-
氧化铝流动角测定仪
-
塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高端电压小交流电耐压仪(耐电弧放电耐压仪)-(计算公式机把控好)
High voltage low current tester (arc resistance tester) - (computer control)
车辆名字:耐电弧试验机
Product name: electric arc resistance tester
产品的主要参数:NDH-A
Product model: NDH - A
够满足条件:GB/T 1411-2002《气体耐压装修材料耐高低平电流值弧光电池充电的试验台》(一样IEC 61621-1997)及ASTM D495等的标准的标准要求设汁造成的,并合适IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
重点选用範圍及用途:
本经过多次实验发现机是依据应用软件于交流接触器、物品和家庭支出物品等行业中的电工作业用朔料材质、硅橡胶胶和隔绝漆等隔绝素材的耐电弧焊接焊接效能方面认定,主主要用于粉末状隔绝素材如:朔料材质、聚酰亚胺膜、硅橡胶、黑云母、淘瓷、波璃、隔绝油、隔绝漆、硬纸板等材质的耐电弧焊接焊接效能方面测试方法;
本调查性机由求算机管控运作,就可以出现眼下工作调查性环境及调查性的时间,调查性终止后并留存眼下工作调查性数据库,并可打印机.标实践评估报告。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 超声波焊接机为上下左右一体机结构设计,下端为方法机系统,上半部为可靠性湿热试验箱。
2 本类产品选用*新智力管控枝术,用会选择编译程序(IEC或ASTM)可主动做实验,并在我的安卓手机体现应力测试流程和导致。
3 **功效不错,抗扰乱本事强,测式高精准程度高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电弧焊接通断时间间隔确定误差:大于 ±10ms
2 调压器出水量:2kVA
3 额定功率现场实验电阻值:12.5kV
4 耐压试验线电压精确:±3%
5 瞬时电流操纵表面粗糙度:±10% 功率衡量精密度:1.5%
6 电级对试件压力差:(0.5±0.05)N
7 参比电极建筑材料:钨棒
8 金属电极高度:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 适用生活环境溫度:(23±2)℃
10 选用生活环境温度湿度:(50±5)%
11 开关电源:220V±5% 50Hz
12 测试 形式: 国家行业标准/美标/10 mA 陆续/20 mA 连着/30 mA连继/40 mA不间断
13 校正程序代码如表:
| 应用程序段 | 电弧焊接功率 mA | 脉冲通断时长s | 各软件程序段不间断日期s | 耐压总精力s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 多次通 | 60 | 240 | |
| 5 | 20 | 多次通 | 60 | 300 | |
| 6 | 30 | 间断性通 | 60 | 360 | |
| 7 | 40 | 间断通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 数字序号 | 明称 | 数据 | 微信备注 |
| 01 | 耐焊弧检查仪 | 一款 | |
| 02 | 电级体统 | 五套 | |
| 03 | 探针橡胶支座 | 这套 | |
| 04 | 电源线高压电缆 | 一种 | |
| 05 | 地线放** | 一个 | |
| 06 | 电流量毫安表 | 1台 | |
| 07 | 笔记本测控pc软件 | 一套套 | |
| 08 | 坯料架 | 1支 | |
| 09 | 电极片路程规则块 | 2块 | |
| 10 | 的视角规格块 | 2块 | |
| 11 | 工业陶瓷片 | 2片 | |
| 12 | 喷墨复印机 | 1台 | 的品牌 |
| 13 | 估算机 | 1台 | 产品品牌 |
| 14 | 用详细维修手册 | 1份 | |
| 15 | 适合证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 的产品类型:
NDH-A 耐电弧焊接经过多次实验发现仪-微机保持
NDH-B 耐脉冲耐压仪-接触屏操作
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!